Step-by-step Instruction For Installing A Front Entry Door.

Here is the step by step process that we do when installing front entry doors:

1. Remove The Old Door

We remove the old door carefully to safeguard the opening from damages and prevent cracks on the walls. We remove the door leaf first, followed by the trim, frame, jambs, and threshold. After that, we do away with the plaster, caulking, as well as the putty. Also, tie bolts or reinforcement bars need to be removed. Then we cut off the hinges. Finally, we remove the door leaf.

2. Fixing The Doorway

The space needed to install your entry door must be broader in one inch than your door frame.  We ensure that it is level to avoid distortions and warps. Also, we get rid of putty pieces and other likely to fall elements.

3. Door Leaf And Frame Preparation

We check the operation of locks, other elements, then screw handles if needed. Do not damage the door by closing it using the painter’s tape, especially if it lacks protective film.

4.  Door Frame Installation

We correctly insert the door frame, using the lever to ensure the door frame is in the right position. Then, we fix three shims between the wall and the structure and additional four shims, two at the top and below, respectively.

5. Tightening Up The Door Frame

We make holes on the hinge jamb, then use the leveler when installing the door to maintain the accuracy. After that, we fasten the frame and hang the door leaf.

6. Finishing

Using mounting foam, we seal any openings to avoid drafts. When the seal has hardened for some time, we insert the casing and other accessories.